Hyundai Santa Fe Check Engine Light

How many miles can you drive with the check engine light?

Since any check engine code has its own level of severity, it is difficult to predict how bountiful miles you can drive with the warning light on. If you check engine light is flashing, we advocate that you pull over and contact Courtesy Hyundai of Tampa to help prefer if your vehicle is safe to drive in or if we advocate a tow truck. It could be anything from a bad sensor to plug wires needing to be replaced. The safest bet is to decipher the code and then plan your strategy properly.

Check Engine Light Service Hyundai Santa Fe

What do you do when you’re driving along in your Hyundai Santa Fe and abruptly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a little because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the vehicle over to the side of the road and call a tow truck, but it is recommended that you get your Hyundai Santa Fe checked as soon as possible. Ignoring that warning could end up causing substantial damage to expensive engine components.

When your Hyundai Santa Fe's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t noble, a computer turns on your check engine light. This amber or yellow light is frequently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic scan tool that is used by our Hyundai auto repair mechanics at Courtesy Hyundai of Tampa. There are also a number of comparatively economical code readers that are designed for do-it-yourselfers, should you determine that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an persuasive professional to determine the issue and repair it.

Hyundai Santa Fe Check Engine Light Flashing

Although there are plentiful achievable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are plentiful normal causes including something as classic as a loose gas cap. Added normal reasons for a Check Engine Light are faulty emissions control part, dirty mass airflow sensor, damaged oxygen sensor, a malfunction with the fuel injection system, faulty head gasket, or defective spark plugs to name various. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as necessary to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every Hyundai Santa Fe was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its basic systems. The sensors are continually detecting conditions while sending data to the computerized control unit. If the computerized control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is remorseful nor what to do about it. That’s where we come in; Courtesy Hyundai of Tampa provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Immensely Qualified Service professional.

Is it safe to drive your Hyundai Santa Fe with the check engine light on?

This question is not very effortless because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is mostly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more perilous problem. If the check engine light is flashing, this means that there is a perilous issue and it is recommended to service your Hyundai Santa Fe shortly. Call the mentors at Courtesy Hyundai of Tampa by dialing 8132855062 so you can describe the issues. Or reduce your speed and transport your Hyundai to our certified mechanics as soon as exact.

Hyundai Santa Fe Check Engine Light

If the check engine light in your Hyundai Santa Fe starts flashing, that means that the problem needs speedy attention and your Hyundai should be brought in shortly. A flashing light illustrates that the problem is alarming and if not taken care of shortly may result in enormous wear and tear to the vehicle. This blinking light usually indicates a rigid engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly enhance the temperature of the catalytic converter to a point where damage is achievable, requiring an fancy repair. Some owners ask if spark plugs cause the check engine light to flash? This can completely be the cause. A destructive, erstwhile or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to travel to work, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a highly expensive repair. If your check engine light is twinkling, please contact our company of automotive consultants at Courtesy Hyundai of Tampa straightaway by calling 8132855062.

What could cause the check engine light to come on in a Hyundai Santa Fe?

When your check engine light comes on, this could be as prevalent as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a alarming problem that could cause alarming damage to your engine and come with a generous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A dependable glow naturally means something less alarming but a flashing check engine light hints that your vehicle’s engine is in alarming trouble and service is needed immediately. If your check engine light is flashing in your Hyundai Santa Fe, we extraordinarily suggest not to travel to work the vehicle and schedule Hyundai service today. Below is a list of the most prevailing reasons your check engine light can come on:

• The battery is low or dead. The battery in your Hyundai Santa Fe is every imposing. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't certainly require maintenance. The value of a new one depends on the type of Hyundai you drive, but check our classic service coupons and specials.
• Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is needed to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to genuine changes, like altitude. If your Hyundai Santa Fe is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
• Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer efficient when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause wear and tear to your catalytic converter and your Hyundai Santa Fe's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to suggest the right assortment of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your Hyundai Santa Fe’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Courtesy Hyundai of Tampa offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your Hyundai Santa Fe will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause disparate problems from overheating.
• Issues with all aftermarket items. An aftermarket alarm, exhaust or disparate item can wreak havoc on your Hyundai Santa Fe if it’s not installed properly. These aftermarket components and accessories can dump the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound aware, bring your Santa Fe to Hyundai and have our squad of certified technicians ensure that your aftermarket items were installed correctly and aren't causing all issue. Getting accessories, particularly aftermarket parts and accessories, or using OEM components earliest place might cost a little bit more but could save you money from having to get low work and wear and tear caused by low installation work corrected.
• One of the most typical and frequent cause is that your Hyundai Santa Fe gas cap is loose, damaged or missing. The gas cap for your Hyundai Santa Fe serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on shortly after you put gas in your Hyundai Santa Fe, earliest thing you should check is to make fearless the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• New Spark Plugs or Plug Wires are needed for your Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel assortment in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or wear and tear to ignition coils and O2 sensors, essential to more expensive repairs.
• Your Hyundai Santa Fe has a vacuum leak. Every Hyundai Santa Fe has a vacuum system that performs a advantageous assortment of functions. The vacuum system also helps decrease harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can parched out and crack, particularly if they’re exposed to imposing heat or extreme bitter.

What Does the Check Engine Light Mean?

One of the most naturally misunderstood lights or indicators in your Hyundai Santa Fe is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few alternative ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your car. Onboard computers increasingly have controlled and monitored car performance since the 80s and do a variety of things for your Hyundai Santa Fe. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name bountiful. With that being said, the check engine light can select a variety of unmistakable things. It can be as uncomplicated as your gas cap being loose or as astonishing as engine knocking. If your check engine light is on in your Hyundai Santa Fe, contact Courtesy Hyundai of Tampa. Our Hyundai service department can help you find out what code is turning your check engine light on or audit why your check engine light is flashing. Contact Courtesy Hyundai of Tampa today!

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is mostly between $88 and $111. The apt news, Courtesy Hyundai of Tampa offers complimentary multi-point inspections and free diagnostics, in most cases, to help opt for the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more relentless failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it apt to get the common code reading and diagnosis.

Hyundai Santa Fe Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that scant light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also noted as the OBD (on-board computer diagnostic system) in your Santa Fe. There are hundreds of different codes that your check engine light can represent. While that sounds daunting, with a scant patience, tackling basic diagnostics will give you charming knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, overt and agreeable vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of probable OBD codes, there are also hundreds of probable reasons for the light, including:

• Computer output circuit issues
• Old Battery
• O2 Sensor
• Loose Gas Cap or Missing Gas Cap
• Transmission issues
• Fuel and air metering systems problems
• Ignition system faults
• Emissions controls issues
• Bad Spark Plugs

This is why it is various for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a hazardous concern, you risk harmful your vehicle extra by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a certified Hyundai mechanic. Call Courtesy Hyundai of Tampa at 8132855062 straightaway or schedule your check engine light service online today!

Will the check engine light reset itself?

The check engine light on your Hyundai Santa Fe will usually shut itself off if the issue or code that caused it to turn on is revamped. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Hyundai Santa Fe light will go off after about 20-40 miles. If you drive over that reward and the light is still on, you will need to bring it in to Courtesy Hyundai of Tampa so the light and code can be double-checked and reset.