Hyundai Elantra Check Engine Light

Will the check engine light reset itself?

The check engine light on your Hyundai Elantra will commonly shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going consistent, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your Hyundai Elantra light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Courtesy Hyundai of Tampa so the light and code can be double-checked and reset.

Is it safe to drive your Hyundai Elantra with the check engine light on?

If the check engine light is flashing, this means that there is a rigid issue and it is recommended to service your Hyundai Elantra expeditiously. This question is not incredibly easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be protected to drive. This is typically indicated by a practical glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more rigid problem. Call the specialists at Courtesy Hyundai of Tampa by dialing 8132855062 so you can describe the issues. Or reduce your speed and bring your Hyundai to our certified mechanics as soon as usable.

Hyundai Elantra Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several amicable causes consisting something as functional as a loose gas cap. Additional amicable reasons for a Check Engine Light are faulty emissions control part, faulty head gasket, a malfunction with the fuel injection system, damaged oxygen sensor, dirty mass airflow sensor, or defective spark plugs to name assorted. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as paramount to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every Hyundai Elantra was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its big systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light brightens telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is erroneous nor what to do about it. That’s where we come in; Courtesy Hyundai of Tampa provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Largely Qualified Service mechanical.

What could cause the check engine light to come on in a Hyundai Elantra?

When your check engine light comes on, this could be as pure as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a risky problem that could cause risky damage to your engine and come with a colossal repair bill. Depending on your make and model, the check engine light will illuminate or blink. A dependable glow normally means something less risky but a flashing check engine light indicates that your vehicle’s engine is in risky trouble and service is needed immediately. If your check engine light is flashing in your Hyundai Elantra, we highly advise not to drive the vehicle and schedule Hyundai service immediately. Below is a list of the most persuasive reasons your check engine light can come on:

• New Spark Plugs or Plug Wires are essential for your Hyundai Elantra. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are dangerous or classical, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, primary to more expensive repairs.
• The battery is slight or dead. The battery in your Hyundai Elantra is every fascinating. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did assorted decades ago, and they don't really require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our persuasive service coupons and specials.
• Your catalytic converter is dangerous or going dangerous. The catalytic converter is a part of your Hyundai Elantra’s exhaust system. The catalytic converter's work is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is commonly caused by neglected maintenance, which is why Courtesy Hyundai of Tampa offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your Hyundai Elantra will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause additional problems from overheating.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or additional item can wreak havoc on your Hyundai Elantra if it’s not installed well. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound commonplace, bring your Elantra to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing any issue. Getting accessories, notably aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Elantra is what determines how much fuel is essential to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to actual changes, like altitude. If your Hyundai Elantra is having trouble starting, idling rough or has a quick change in the position of the throttle pedal, this could be a sign of a dangerous mass airflow sensor.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer possible when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your Hyundai Elantra's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to mean the right mixture of air and fuel that enters the cylinders in your engine. A dangerous O2 sensor can also cause a car to fail an emissions test.
• One of the most effortless and frequent cause is that your Hyundai Elantra gas cap is loose, damaged or missing. The gas cap for your Hyundai Elantra serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a dangerous fuel cap? If your gas cap is classical or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on promptly after you put gas in your Hyundai Elantra, first thing you should check is to make satisfied the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Your Hyundai Elantra has a vacuum leak. Every Hyundai Elantra has a vacuum system that performs a wide variety of functions. The vacuum system also helps decrease harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, notably if they’re exposed to important heat or extreme cold.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we recommend that you pull over and contact Courtesy Hyundai of Tampa to help find out if your vehicle is safe to drive in or if we recommend a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced.

What Does the Check Engine Light Mean?

One of the most continuously misunderstood lights or indicators in your Hyundai Elantra is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in assorted odd ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your Hyundai Elantra. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can find out a variety of discrete things. It can be as straightforward as your gas cap being loose or as relentless as engine knocking. If your check engine light is on in your Hyundai Elantra, contact Courtesy Hyundai of Tampa. Our Hyundai service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is twinkling. Contact Courtesy Hyundai of Tampa today!

Check Engine Light Service Hyundai Elantra

What do you do when you’re driving along in your Hyundai Elantra and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your Hyundai Elantra checked as soon as likely. Ignoring that warning could end up causing large damage to lavish engine elements.

When your Hyundai Elantra's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t decent, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an technical analyze tool that is used by our Hyundai auto repair mechanics at Courtesy Hyundai of Tampa. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced skilled to find out the issue and repair it.

Hyundai Elantra Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard promptly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Elantra. There are hundreds of distinctive codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling big diagnostics will give you amiable knowledge about your vehicle and will also allow that Check Engine Light to do what it is precisely supposed to do: be your guide. Unfortunately, amiable and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of convenient OBD codes, there are also hundreds of convenient reasons for the light, including:

• Computer output circuit issues
• Ignition system faults
• Transmission issues
• Emissions controls issues
• Bad Spark Plugs
• Loose Gas Cap or Missing Gas Cap
• O2 Sensor
• Fuel and air metering systems problems
• Old Battery

This is why it is splendid for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Courtesy Hyundai of Tampa at 8132855062 today or schedule your check engine light service online today! If the engine light comes on due to a awesome concern, you risk damaging your car extra by not repairing the issue right away. When your check engine light comes on, you should get it checked out quickly by a certified Hyundai mechanic.

Hyundai Elantra Check Engine Light

A flashing light indicates that the problem is dangerous and if not taken care of shortly may result in suitable damage to the automobile. If the check engine light in your Hyundai Elantra starts flashing, that means that the problem needs hasty attention and your Hyundai should be brought in shortly. This flashing light usually indicates a exacting engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can abruptly raise the temperature of the catalytic converter to a point where damage is available, requiring an pricey repair. Some owners ask if spark plugs cause the check engine light to flash? This can strictly be the cause. A bad, historic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is shining, please contact our team of automotive experts at Courtesy Hyundai of Tampa immediately by calling 8132855062.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The comfortable news, Courtesy Hyundai of Tampa offers complimentary multi-point inspections and free diagnostics, in most cases, to help pick the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not accurately tightened to a more important failure like a serious catalytic converter or a problem with one of the car's oxygen sensors, so it comfortable to get the polite code reading and diagnosis.