2019 Hyundai Santa Fe Check Engine Light

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more miraculous failure like a detrimental catalytic converter or a problem with one of the car's oxygen sensors, so it firm to get the correct code reading and diagnosis. The average rate for a check engine light diagnosis & testing is typically between $88 and $111. The firm news, Courtesy Hyundai of Tampa offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light.

What could cause the check engine light to come on in a 2019 Hyundai Santa Fe?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a rare problem that could cause rare damage to your engine and come with a broad repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow commonly means something less rare but a flashing check engine light hints that your vehicle’s engine is in rare trouble and service is necessary straightaway. If your check engine light is flashing in your 2019 Hyundai Santa Fe, we immensely recommend not to drive the car and schedule Hyundai service today. Below is a list of the most usual reasons your check engine light can come on:

• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is needed to run your engine efficiently by measuring the reward of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to specific changes, like altitude. If your Hyundai Santa Fe is having trouble starting, idling rough or has a precipitous change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
• One of the most modern and bountiful cause is that your 2019 Hyundai Santa Fe gas cap is loose, damaged or missing. The gas cap for your 2019 Hyundai Santa Fe serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is common or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't lavish. If your check engine light turns on instantly after you put gas in your 2019 Hyundai Santa Fe, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or back-up item can wreak havoc on your 2019 Hyundai Santa Fe if it’s not installed accurately. These aftermarket elements and accessories can discard the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound appreciative, bring your Santa Fe to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM elements first place might cost a little bit more but could save you money from having to get low work and damage caused by low installation work corrected.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, appreciative as the O2 sensor, measures the reward of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less actual when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2019 Hyundai Santa Fe's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the right variety of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
• Your 2019 Hyundai Santa Fe has a vacuum leak. Every Hyundai Santa Fe has a vacuum system that performs a expansive variety of functions. The vacuum system also helps rebate harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can barren out and crack, especially if they’re exposed to imposing heat or extreme enraged.
• The battery is low or dead. The battery in your 2019 Hyundai Santa Fe is every critical. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our actual service coupons and specials.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2019 Hyundai Santa Fe’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is consistently caused by neglected maintenance, which is why Courtesy Hyundai of Tampa offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2019 Hyundai Santa Fe will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause back-up problems from overheating.
• New Spark Plugs or Plug Wires are needed for your 2019 Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel variety in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires transport the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or common, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, dominant to more lavish repairs.

2019 Hyundai Santa Fe Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly brightens, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also acknowledged as the OBD (on-board computer diagnostic system) in your Santa Fe. There are hundreds of particular codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling primary diagnostics will give you available knowledge about your vehicle and will also allow that Check Engine Light to do what it is genuinely supposed to do: be your guide. Unfortunately, discernable and cooperative vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of attainable OBD codes, there are also hundreds of attainable reasons for the light, including:

• Ignition system faults
• Loose Gas Cap or Missing Gas Cap
• O2 Sensor
• Old Battery
• Bad Spark Plugs
• Computer output circuit issues
• Emissions controls issues
• Transmission issues
• Fuel and air metering systems problems

This is why it is mandatory for someone who does not have assorted of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out abruptly by a certified Hyundai mechanic. If the engine light comes on due to a precarious concern, you risk damaging your car extra by not repairing the issue right away. Call Courtesy Hyundai of Tampa at 8132855062 today or schedule your check engine light service online today!

2019 Hyundai Santa Fe Check Engine Light

A flashing light hints that the problem is relentless and if not taken care of immediately may result in big damage to the vehicle. If the check engine light in your 2019 Hyundai Santa Fe starts flashing, that means that the problem needs abrupt attention and your Hyundai should be brought in immediately. This blinking light usually indicates a strict engine misfire allowing unburned fuel to be jettisoned into the exhaust system. There it can instantly surge the temperature of the catalytic converter to a point where damage is likely, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can strictly be the cause. A destructive, former or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to travel to work, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Courtesy Hyundai of Tampa now by calling 8132855062.

Check Engine Light Service 2019 Hyundai Santa Fe

What do you do when you’re driving along in your Hyundai Santa Fe and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a small because you have small idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2019 Hyundai Santa Fe checked as soon as coherent. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2019 Hyundai Santa Fe's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t correct, a computer turns on your check engine light. This amber or yellow light is typically labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic inspect tool that is used by our Hyundai auto repair mechanics at Courtesy Hyundai of Tampa. There are also a number of relatively low-priced code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an skilled trained to indicate the issue and repair it.

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. If you check engine light is flashing, we imply that you pull over and contact Courtesy Hyundai of Tampa to help imply if your vehicle is safe to drive in or if we imply a tow truck. It could be anything from a detrimental sensor to plug wires needing to be changed.

Is it safe to drive your 2019 Hyundai Santa Fe with the check engine light on?

This question is not very important because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be able to travel to work. This is typically indicated by a persistent glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more gigantic problem. If the check engine light is twinkling, this means that there is a gigantic issue and it is recommended to service your Hyundai Santa Fe quickly. Call the experts at Courtesy Hyundai of Tampa by dialing 8132855062 so you can describe the issues. Or cut your speed and transport your 2019 Hyundai to our certified mechanics as soon as possible.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2019 Hyundai Santa Fe is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in several different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light flashes in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2019 Hyundai Santa Fe. Some of these include controlling engine speed, ignition timing, shifting automatic transmissions and implementing stability control, just to name a lot. With that being said, the check engine light can mean a collection of disparate things. It can be as easy as your gas cap being loose or as perilous as engine knocking. If your check engine light is on in your 2019 Hyundai Santa Fe, contact Courtesy Hyundai of Tampa. Our Hyundai service department can help you learn what code is turning your check engine light on or diagnose why your check engine light is glaring. Contact Courtesy Hyundai of Tampa today!

2019 Hyundai Santa Fe Check Engine Light Flashing

Although there are plentiful potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various accepted causes including something as classic as a loose gas cap. Distinct accepted reasons for a Check Engine Light are faulty emissions control part, faulty head gasket, dirty mass airflow sensor, a malfunction with the fuel injection system, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2019 Hyundai Santa Fe was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the electronic control squad. If the electronic control squad detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is erroneous nor what to do about it. That’s where we come in; Courtesy Hyundai of Tampa provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Remarkably Qualified Service professional.

Will the check engine light reset itself?

The check engine light on your 2019 Hyundai Santa Fe will usually shut itself off if the issue or code that caused it to turn on is serviced. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going possible, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2019 Hyundai Santa Fe light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Courtesy Hyundai of Tampa so the light and code can be double-checked and reset.