2016 Hyundai Tucson Check Engine Light

What could cause the check engine light to come on in a 2016 Hyundai Tucson?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a risky problem that could cause risky damage to your engine and come with a generous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A persistent glow customarily means something less risky but a blinking check engine light suggests that your vehicle’s engine is in risky trouble and service is decisive expeditiously. If your check engine light is blinking in your 2016 Hyundai Tucson, we tremendously recommend not to drive the vehicle and schedule Hyundai service today. Below is a list of the most historical reasons your check engine light can come on:

• Your catalytic converter is damaging or going damaging. The catalytic converter is a part of your 2016 Hyundai Tucson’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is usually caused by neglected maintenance, which is why Courtesy Hyundai of Tampa offers a complimentary multi-point inspection with each Hyundai service. If you have an issue with your catalytic converter and don't get it serviced, your 2016 Hyundai Tucson will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause alternative problems from overheating.
• New Spark Plugs or Plug Wires are crucial for your 2016 Hyundai Tucson. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are damaging or classic, you will experience little performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, best to more fancy repairs.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Tucson is what determines how much fuel is crucial to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to direct changes, like altitude. If your Hyundai Tucson is having trouble starting, idling rough or has a nimble change in the position of the throttle pedal, this could be a sign of a damaging mass airflow sensor.
• The battery is little or dead. The battery in your 2016 Hyundai Tucson is each usual. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our contemporary service coupons and specials.
• One of the most regular and frequent cause is that your 2016 Hyundai Tucson gas cap is loose, damaged or missing. The gas cap for your 2016 Hyundai Tucson serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a damaging fuel cap? If your gas cap is classic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't fancy. If your check engine light turns on straightaway after you put gas in your 2016 Hyundai Tucson, first thing you should check is to make confident the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Issues with each aftermarket items. An aftermarket alarm, exhaust or alternative item can wreak havoc on your 2016 Hyundai Tucson if it’s not installed perfectly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even avoid the vehicle from starting. If these issues sound commonplace, bring your Tucson to Hyundai and have our department of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing each issue. Getting accessories, highly aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get little perform and damage caused by little installation perform corrected.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, noted as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less accurate when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Hyundai Tucson's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the good mixture of air and fuel that enters the cylinders in your engine. A damaging O2 sensor can also cause a car to fail an emissions test.
• Your 2016 Hyundai Tucson has a vacuum leak. Each Hyundai Tucson has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dehydrated out and crack, highly if they’re exposed to imposing heat or extreme hasty.

2016 Hyundai Tucson Check Engine Light Flashing

Although there are bountiful likely causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several logical causes including something as pure as a loose gas cap. Coherent logical reasons for a Check Engine Light are a malfunction with the fuel injection system, damaged oxygen sensor, faulty emissions control part, faulty head gasket, dirty mass airflow sensor, or defective spark plugs to name a little. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as fundamental to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2016 Hyundai Tucson was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light brightens telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is untrue nor what to do about it. That’s where we come in; Courtesy Hyundai of Tampa provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service technological.

2016 Hyundai Tucson Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that microscopic light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear correct away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also accepted as the OBD (on-board computer diagnostic system) in your Tucson. There are hundreds of different codes that your check engine light can mean. While that sounds daunting, with a microscopic patience, tackling decisive diagnostics will give you available knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, decisive and available vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of convenient OBD codes, there are also hundreds of convenient reasons for the light, including:

• Old Battery
• Fuel and air metering systems problems
• O2 Sensor
• Ignition system faults
• Emissions controls issues
• Bad Spark Plugs
• Loose Gas Cap or Missing Gas Cap
• Transmission issues
• Computer output circuit issues

This is why it is powerful for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out immediately by a certified Hyundai mechanic. Call Courtesy Hyundai of Tampa at 8132855062 today or schedule your check engine light service online today! If the engine light comes on due to a perilous concern, you risk damaging your car further by not repairing the issue polite away.

How many miles can you drive with the check engine light?

Since every check engine code has its own level of severity, it is hard to predict how many miles you can drive with the warning light on. If you check engine light is flashing, we suggest that you pull over and contact Courtesy Hyundai of Tampa to help imply if your vehicle is capable to drive in or if we suggest a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a destructive sensor to plug wires needing to be changed.

Will the check engine light reset itself?

The check engine light on your 2016 Hyundai Tucson will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going sane, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Hyundai Tucson light will go off after about 20-40 miles. If you drive over that eject and the light is still on, you will need to bring it in to Courtesy Hyundai of Tampa so the light and code can be double-checked and reset.

What Does the Check Engine Light Mean?

One of the most often misunderstood lights or indicators in your 2016 Hyundai Tucson is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in assorted odd ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light flashes in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a mixture of things for your 2016 Hyundai Tucson. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can suggest a variety of various things. It can be as straightforward as your gas cap being loose or as hazardous as engine knocking. If your check engine light is on in your 2016 Hyundai Tucson, contact Courtesy Hyundai of Tampa. Our Hyundai service department can help you opt for what code is turning your check engine light on or investigate why your check engine light is flashing. Contact Courtesy Hyundai of Tampa today!

Check Engine Light Service 2016 Hyundai Tucson

What do you do when you’re driving along in your Hyundai Tucson and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a miniature because you have miniature idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t imply you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Hyundai Tucson checked as soon as productive. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2016 Hyundai Tucson's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t noble, a computer turns on your check engine light. This amber or yellow light is regularly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an computerized scan tool that is used by our Hyundai auto repair mechanics at Courtesy Hyundai of Tampa. There are also a number of relatively inexpensive code readers that are designed for do-it-yourselfers, should you embrace that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an active competent to choose the issue and repair it.

2016 Hyundai Tucson Check Engine Light

A twinkling light illustrates that the problem is powerful and if not taken care of today may result in extensive damage to the vehicle. If the check engine light in your 2016 Hyundai Tucson starts twinkling, that means that the problem needs prompt attention and your Hyundai should be brought in today. This blinking light usually indicates a strict engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can abruptly increase the temperature of the catalytic converter to a point where damage is likely, requiring an fancy repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A bad, historic or dirty spark plug can cause the engine to misfire. If your check engine light is blinking, please contact our team of automotive experts at Courtesy Hyundai of Tampa immediately by calling 8132855062. If the problem is ignored or you continue to commute, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair.

Is it safe to drive your 2016 Hyundai Tucson with the check engine light on?

This question is not excessively simple because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be secure to drive. This is customarily indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more risky problem. If the check engine light is flashing, this means that there is a risky issue and it is recommended to service your Hyundai Tucson immediately. Call the experts at Courtesy Hyundai of Tampa by dialing 8132855062 so you can describe the issues. Or lessen down your speed and bring your 2016 Hyundai to our certified mechanics as soon as probable.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more hazardous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it essential to get the correct code reading and diagnosis. The central cost for a check engine light diagnosis & testing is normally between $88 and $111. The essential news, Courtesy Hyundai of Tampa offers complimentary multi-point inspections and free diagnostics, in most cases, to assist learn the cause of your check engine light.