2016 Hyundai Elantra Check Engine Light

What could cause the check engine light to come on in a 2016 Hyundai Elantra?

When your check engine light comes on, this could be as easy as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a treacherous problem that could cause treacherous wear and tear to your engine and come with a considerable repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow commonly means something less treacherous but a flashing check engine light indicates that your vehicle’s engine is in treacherous trouble and service is necessary hastily. If your check engine light is flashing in your 2016 Hyundai Elantra, we remarkably recommend not to drive the vehicle and schedule Hyundai service today. Below is a list of the most dominant reasons your check engine light can come on:

• New Spark Plugs or Plug Wires are crucial for your 2016 Hyundai Elantra. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are harmful or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, major to more expensive repairs.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, known as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less effective when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2016 Hyundai Elantra's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to determine the right mixture of air and fuel that enters the cylinders in your engine. A harmful O2 sensor can also cause a automobile to fail an emissions test.
• One of the most daily and frequent cause is that your 2016 Hyundai Elantra gas cap is loose, damaged or missing. The gas cap for your 2016 Hyundai Elantra serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a harmful fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on immediately after you put gas in your 2016 Hyundai Elantra, first thing you should check is to make confident the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Issues with each aftermarket items. An aftermarket alarm, exhaust or further item can wreak havoc on your 2016 Hyundai Elantra if it’s not installed properly. These aftermarket parts and accessories can deposit the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound concerned, bring your Elantra to Hyundai and have our unit of certified mechanics ensure that your aftermarket items were installed accurately and aren't causing each issue. Getting accessories, greatly aftermarket parts and accessories, or using OEM parts first place might cost a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• Your catalytic converter is harmful or going harmful. The catalytic converter is a part of your 2016 Hyundai Elantra’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is frequently caused by neglected maintenance, which is why Courtesy Hyundai of Tampa offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2016 Hyundai Elantra will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your automobile may run at a higher temperature, too, which can cause further problems from overheating.
• The battery is low or dead. The battery in your 2016 Hyundai Elantra is every numerous. Without a automobile battery, your automobile won’t start, light up the road ahead, play the radio or charge your phone. Today’s automobile batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our actual service coupons and specials.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Elantra is what determines how much fuel is crucial to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to hopeful changes, like altitude. If your Hyundai Elantra is having trouble starting, idling rough or has a precipitous change in the position of the throttle pedal, this could be a sign of a harmful mass airflow sensor.
• Your 2016 Hyundai Elantra has a vacuum leak. Every Hyundai Elantra has a vacuum system that performs a wide assortment of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can bare out and crack, greatly if they’re exposed to imposing heat or extreme cool.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. Since each check engine code has its own level of severity, it is difficult to predict how excellent miles you can drive with the warning light on. If you check engine light is flashing, we advise that you pull over and contact Courtesy Hyundai of Tampa to assist represent if your vehicle is safe to drive in or if we advise a tow truck. The safest bet is to decipher the code and then plan your strategy properly.

Will the check engine light reset itself?

The check engine light on your 2016 Hyundai Elantra will often shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2016 Hyundai Elantra light will go off after about 20-40 miles. If you commute over that dump and the light is still on, you will need to bring it in to Courtesy Hyundai of Tampa so the light and code can be double-checked and reset.

2016 Hyundai Elantra Check Engine Light Flashing

Although there are countless conceivable causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are bountiful informed causes including something as prevalent as a loose gas cap. Further informed reasons for a Check Engine Light are damaged oxygen sensor, dirty mass airflow sensor, a malfunction with the fuel injection system, faulty head gasket, faulty emissions control part, or defective spark plugs to name assorted. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2016 Hyundai Elantra was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its hard systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is amiss nor what to do about it. That’s where we come in; Courtesy Hyundai of Tampa provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service professional.

Check Engine Light Service 2016 Hyundai Elantra

What do you do when you’re driving along in your Hyundai Elantra and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a scant because you have scant idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2016 Hyundai Elantra checked as soon as conceivable. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2016 Hyundai Elantra's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the computerized control system that it can’t noble, a computer turns on your check engine light. This amber or yellow light is generally labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is opt for with an electronic scan tool that is used by our Hyundai auto repair mechanics at Courtesy Hyundai of Tampa. There are also a number of relatively low-cost code readers that are designed for do-it-yourselfers, should you designate that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an skilled expert to opt for the issue and repair it.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not accordingly tightened to a more perilous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it exceptional to get the suitable code reading and diagnosis. The average estimate for a check engine light diagnosis & testing is naturally between $88 and $111. The exceptional news, Courtesy Hyundai of Tampa offers complimentary multi-point inspections and free diagnostics, in most cases, to help read the cause of your check engine light.

2016 Hyundai Elantra Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that microscopic light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also acknowledged as the OBD (on-board computer diagnostic system) in your Elantra. There are hundreds of distinctive codes that your check engine light can represent. While that sounds daunting, with a microscopic patience, tackling basic diagnostics will give you apt knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, clear and helpful vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of functional OBD codes, there are also hundreds of functional reasons for the light, including:

• Ignition system faults
• O2 Sensor
• Emissions controls issues
• Transmission issues
• Bad Spark Plugs
• Fuel and air metering systems problems
• Loose Gas Cap or Missing Gas Cap
• Computer output circuit issues
• Old Battery

This is why it is stringent for someone who does not have assorted of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out rapidly by a certified Hyundai mechanic. Call Courtesy Hyundai of Tampa at 8132855062 now or schedule your check engine light service online today! If the engine light comes on due to a unhealthy concern, you risk damaging your car further by not repairing the issue right away.

What Does the Check Engine Light Mean?

One of the most normally misunderstood lights or indicators in your 2016 Hyundai Elantra is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a lot different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2016 Hyundai Elantra. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can determine a variety of divergent things. It can be as real as your gas cap being loose or as rigorous as engine knocking. If your check engine light is on in your 2016 Hyundai Elantra, contact Courtesy Hyundai of Tampa. Our Hyundai service department can help you learn what code is turning your check engine light on or analyze why your check engine light is twinkling. Contact Courtesy Hyundai of Tampa today!

2016 Hyundai Elantra Check Engine Light

If the check engine light in your 2016 Hyundai Elantra starts flashing, that means that the problem needs immediate attention and your Hyundai should be brought in quickly. A flashing light indicates that the problem is momentous and if not taken care of quickly may result in major damage to the vehicle. This blinking light usually expresses a rigid engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly enhance the temperature of the catalytic converter to a point where damage is achievable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can really be the cause. A intrusive, old or dirty spark plug can cause the engine to misfire. If your check engine light is glaring, please contact our team of automotive experts at Courtesy Hyundai of Tampa quickly by calling 8132855062. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very costly repair.

Is it safe to drive your 2016 Hyundai Elantra with the check engine light on?

If the check engine light is flashing, this means that there is a abhorrent issue and it is recommended to service your Hyundai Elantra quickly. This question is not very easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to commute. This is constantly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more abhorrent problem. Call the mentors at Courtesy Hyundai of Tampa by dialing 8132855062 so you can describe the issues. Or reduce your speed and deliver your 2016 Hyundai to our certified mechanics as soon as available.