Please wait while the page loads...

What Does the Check Engine Light Mean?

One of the most generally misunderstood lights or indicators in your 2014 Hyundai Santa Fe is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few chance ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a range of things for your 2014 Hyundai Santa Fe. Some of these include shifting automatic transmissions controlling engine speed, ignition timing, and implementing stability control, just to name assorted. With that being said, the check engine light can mean a variety of other things. It can be as easy as your gas cap being loose or as unhealthy as engine knocking. If your check engine light is on in your 2014 Hyundai Santa Fe, contact Courtesy Hyundai of Tampa. Our Hyundai service department can aid you find out what code is turning your check engine light on or probe why your check engine light is glaring. Contact Courtesy Hyundai of Tampa today!

Will the check engine light reset itself?

The check engine light on your 2014 Hyundai Santa Fe will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going persuasive, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2014 Hyundai Santa Fe light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Courtesy Hyundai of Tampa so the light and code can be double-checked and reset.

2014 Hyundai Santa Fe Check Engine Light Flashing

Although there are bountiful feasible causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are various persuasive causes including something as essential as a loose gas cap. Supplemental persuasive reasons for a Check Engine Light are a malfunction with the fuel injection system, damaged oxygen sensor, dirty mass airflow sensor, faulty emissions control part, faulty head gasket, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2014 Hyundai Santa Fe was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its crucial systems. The sensors are frequently detecting conditions while sending data to the electronic control squad. If the electronic control squad detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is wrong nor what to do about it. That’s where we come in; Courtesy Hyundai of Tampa provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extraordinarily Qualified Service experienced.

Is it safe to drive your 2014 Hyundai Santa Fe with the check engine light on?

This question is not particularly amiable because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be reliable to drive. This is typically indicated by a instinctive glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more exacting problem. If the check engine light is flashing, this means that there is a exacting issue and it is recommended to service your Hyundai Santa Fe rapidly. Call the experts at Courtesy Hyundai of Tampa by dialing 8132855062 so you can describe the issues. Or reduce your speed and bring your 2014 Hyundai to our certified technicians as soon as attainable.

How many miles can you drive with the check engine light?

It could be anything from a bad sensor to plug wires needing to be replaced. If you check engine light is flashing, we advise that you pull over and contact Courtesy Hyundai of Tampa to help suggest if your vehicle is suitable to commute in or if we advise a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly. Since each check engine code has its own level of severity, it is difficult to predict how countless miles you can commute with the warning light on.

Check Engine Light Service 2014 Hyundai Santa Fe

What do you do when you’re driving along in your Hyundai Santa Fe and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a meager because you have meager idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the rate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t represent you have to pull the vehicle over to the side of the road and call a tow truck, but it is recommended that you get your 2014 Hyundai Santa Fe checked as soon as feasible. Ignoring that warning could end up causing big damage to expensive engine components.

When your 2014 Hyundai Santa Fe's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t honest, a computer turns on your check engine light. This amber or yellow light is consistently labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electrical scan tool that is used by our Hyundai auto repair mechanics at Courtesy Hyundai of Tampa. There are also a number of rather inexpensive code readers that are designed for do-it-yourselfers, should you favor that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to choose the issue and repair it.

2014 Hyundai Santa Fe Check Engine Light

A flashing light indicates that the problem is important and if not taken care of quickly may result in sizable damage to the vehicle. If the check engine light in your 2014 Hyundai Santa Fe starts flashing, that means that the problem needs sudden attention and your Hyundai should be brought in quickly. This blinking light frequently expresses a exacting engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can immediately raise the temperature of the catalytic converter to a point where damage is likely, requiring an pricey repair. Some owners ask if spark plugs cause the check engine light to flash? This can exactly be the cause. A detrimental, aged or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a incredibly expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Courtesy Hyundai of Tampa straightaway by calling 8132855062.

2014 Hyundai Santa Fe Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also old as the OBD (on-board computer diagnostic system) in your Santa Fe. There are hundreds of different codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling crucial diagnostics will give you joyful knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Unfortunately, distinguishable and noble vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of potential OBD codes, there are also hundreds of potential reasons for the light, including:

  • Ignition system faults
  • Transmission issues
  • Computer output circuit issues
  • Loose Gas Cap or Missing Gas Cap
  • O2 Sensor
  • Bad Spark Plugs
  • Emissions controls issues
  • Fuel and air metering systems problems
  • Old Battery

This is why it is vital for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out instantly by a certified Hyundai mechanic. Call Courtesy Hyundai of Tampa at 8132855062 today or schedule your check engine light service online today! If the engine light comes on due to a abhorrent concern, you risk bad your car further by not repairing the issue right away.

How much does it cost to get the engine light checked?

The average cost for a check engine light diagnosis & testing is typically between $88 and $111. The satisfactory news, Courtesy Hyundai of Tampa offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not perfectly tightened to a more precarious failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it satisfactory to get the affable code reading and diagnosis.

What could cause the check engine light to come on in a 2014 Hyundai Santa Fe?

When your check engine light comes on, this could be as certain as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a critical problem that could cause critical damage to your engine and come with a vast repair bill. Depending on your make and model, the check engine light will illuminate or blink. A consistent glow typically means something less critical but a flashing check engine light indicates that your vehicle’s engine is in critical trouble and service is mandatory swiftly. If your check engine light is flashing in your 2014 Hyundai Santa Fe, we highly recommend not to drive the vehicle and schedule Hyundai service today. Below is a list of the most authentic reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, acknowledged as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less possible when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2014 Hyundai Santa Fe's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to pick the right mixture of air and fuel that enters the cylinders in your engine. A destructive O2 sensor can also cause a car to fail an emissions test.
  • Your 2014 Hyundai Santa Fe has a vacuum leak. Every Hyundai Santa Fe has a vacuum system that performs a wide assortment of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to intense heat or extreme bleak.
  • Your catalytic converter is destructive or going destructive. The catalytic converter is a part of your 2014 Hyundai Santa Fe’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is ordinarily caused by neglected maintenance, which is why Courtesy Hyundai of Tampa offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2014 Hyundai Santa Fe will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause additional problems from overheating.
  • The battery is low or dead. The battery in your 2014 Hyundai Santa Fe is every meaningful. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our sophisticated service coupons and specials.
  • New Spark Plugs or Plug Wires are mandatory for your 2014 Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are destructive or old, you will experience scanty performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, dominant to more expensive repairs.
  • One of the most sufficient and several cause is that your 2014 Hyundai Santa Fe gas cap is loose, damaged or missing. The gas cap for your 2014 Hyundai Santa Fe serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a destructive fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on rapidly after you put gas in your 2014 Hyundai Santa Fe, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • Issues with any aftermarket items. An aftermarket alarm, exhaust or additional item can wreak havoc on your 2014 Hyundai Santa Fe if it’s not installed properly. These aftermarket parts and accessories can eject the battery, trigger the check engine light, or even prevent the vehicle from starting. If these issues sound attentive, bring your Santa Fe to Hyundai and have our unit of certified mechanics ensure that your aftermarket items were installed well and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a tiny bit more but could save you money from having to get scanty work and damage caused by scanty installation work corrected.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is mandatory to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to actual changes, like altitude. If your Hyundai Santa Fe is having trouble starting, idling rough or has a hasty change in the position of the throttle pedal, this could be a sign of a destructive mass airflow sensor.