2013 Hyundai Tucson Check Engine Light

How many miles can you drive with the check engine light?

The safest bet is to decipher the code and then plan your strategy appropriately. Since each check engine code has its own level of severity, it is troublesome to predict how many miles you can commute with the warning light on. It could be anything from a harmful sensor to plug wires needing to be replaced. If you check engine light is flashing, we recommend that you pull over and contact Courtesy Hyundai of Tampa to help hint if your vehicle is stable to commute in or if we recommend a tow truck.

2013 Hyundai Tucson Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard suddenly illuminates, but in reality, it is not something that should cause you to shut down in fear polite away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Tucson. There are hundreds of disparate codes that your check engine light can represent. While that sounds daunting, with a bit patience, tackling main diagnostics will give you excellent knowledge about your vehicle and will also allow that Check Engine Light to do what it is actually supposed to do: be your guide. Unfortunately, visible and troublesome vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of available OBD codes, there are also hundreds of available reasons for the light, including:

• O2 Sensor
• Bad Spark Plugs
• Loose Gas Cap or Missing Gas Cap
• Computer output circuit issues
• Fuel and air metering systems problems
• Transmission issues
• Emissions controls issues
• Old Battery
• Ignition system faults

This is why it is terrific for someone who does not have a lot of automotive knowledge to not assume what a code means. Call Courtesy Hyundai of Tampa at 8132855062 today or schedule your check engine light service online today! If the engine light comes on due to a active concern, you risk intrusive your car additional by not repairing the issue proper away. When your check engine light comes on, you should get it checked out quickly by a certified Hyundai mechanic.

2013 Hyundai Tucson Check Engine Light Flashing

Although there are countless capability causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are contrasting acceptable causes including something as possible as a loose gas cap. Added acceptable reasons for a Check Engine Light are damaged oxygen sensor, dirty mass airflow sensor, faulty head gasket, faulty emissions control part, a malfunction with the fuel injection system, or defective spark plugs to name plentiful. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as needed to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2013 Hyundai Tucson was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its laborious systems. The sensors are continually detecting conditions while sending data to the mechanical control unit. If the mechanical control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is amiss nor what to do about it. That’s where we come in; Courtesy Hyundai of Tampa provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Highly Qualified Service trained.

What could cause the check engine light to come on in a 2013 Hyundai Tucson?

When your check engine light comes on, this could be as uncomplicated as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a relentless problem that could cause relentless damage to your engine and come with a generous repair bill. Depending on your make and model, the check engine light will illuminate or blink. A natural glow mostly means something less relentless but a glaring check engine light indicates that your vehicle’s engine is in relentless trouble and service is basic quickly. If your check engine light is glaring in your 2013 Hyundai Tucson, we extremely recommend not to drive the vehicle and schedule Hyundai service today. Below is a list of the most innate reasons your check engine light can come on:

• One of the most ongoing and copious cause is that your 2013 Hyundai Tucson gas cap is loose, damaged or missing. The gas cap for your 2013 Hyundai Tucson serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on suddenly after you put gas in your 2013 Hyundai Tucson, first thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Your 2013 Hyundai Tucson has a vacuum leak. Each Hyundai Tucson has a vacuum system that performs a wide variety of functions. The vacuum system also helps cut harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, especially if they’re exposed to exciting heat or extreme swift.
• New Spark Plugs or Plug Wires are fundamental for your 2013 Hyundai Tucson. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or old, you will experience poor performance and reduced power. In a bit extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, major to more expensive repairs.
• Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Tucson is what determines how much fuel is fundamental to run your engine efficiently by measuring the deposit of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to big changes, like altitude. If your Hyundai Tucson is having trouble starting, idling rough or has a agile change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or other item can wreak havoc on your 2013 Hyundai Tucson if it’s not installed correctly. These aftermarket parts and accessories can drain the battery, trigger the check engine light, or even hinder the vehicle from starting. If these issues sound prevalent, transport your Tucson to Hyundai and have our unit of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing any issue. Getting accessories, especially aftermarket parts and accessories, or using OEM parts first place might cost a microscopic bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• The battery is low or dead. The battery in your 2013 Hyundai Tucson is each numerous. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did some decades ago, and they don't really require maintenance. The estimate of a new one depends on the type of Hyundai you drive, but check our current service coupons and specials.
• Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, prominent as the O2 sensor, measures the deposit of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be fewer persuasive when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Hyundai Tucson's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to represent the honest mixture of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
• Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2013 Hyundai Tucson’s exhaust system. The catalytic converter's perform is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is generally caused by neglected maintenance, which is why Courtesy Hyundai of Tampa offers a complimentary multi-point inspection with each Hyundai service. If you have an issue with your catalytic converter and don't get it revamped, your 2013 Hyundai Tucson will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause other problems from overheating.

Check Engine Light Service 2013 Hyundai Tucson

What do you do when you’re driving along in your Hyundai Tucson and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks some because you have little idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the rate of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Hyundai Tucson checked as soon as careful. Ignoring that warning could end up causing major damage to expensive engine components.

When your 2013 Hyundai Tucson's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t sufficient, a computer turns on your check engine light. This amber or yellow light is constantly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic observe tool that is used by our Hyundai auto repair mechanics at Courtesy Hyundai of Tampa. There are also a number of relatively economical code readers that are designed for do-it-yourselfers, should you choose that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced experienced to determine the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2013 Hyundai Tucson will commonly shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going humane, and you did bountiful of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Hyundai Tucson light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Courtesy Hyundai of Tampa so the light and code can be double-checked and reset.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not correctly tightened to a more perilous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it marvelous to get the fair code reading and diagnosis. The average price for a check engine light diagnosis & testing is commonly between $88 and $111. The marvelous news, Courtesy Hyundai of Tampa offers complimentary multi-point inspections and free diagnostics, in most cases, to help indicate the cause of your check engine light.

What Does the Check Engine Light Mean?

One of the most normally misunderstood lights or indicators in your 2013 Hyundai Tucson is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few different ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a range of things for your 2013 Hyundai Tucson. Some of these include ignition timing, controlling engine speed, shifting automatic transmissions and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of odd things. It can be as straightforward as your gas cap being loose or as strict as engine knocking. If your check engine light is on in your 2013 Hyundai Tucson, contact Courtesy Hyundai of Tampa. Our Hyundai service department can aid you find out what code is turning your check engine light on or observe why your check engine light is shining. Contact Courtesy Hyundai of Tampa today!

Is it safe to drive your 2013 Hyundai Tucson with the check engine light on?

This question is not incredibly easy because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is mostly indicated by a steady glow of the check engine light. If you notice a difference in the performance of the car, it could be an indication of a more alarming problem. If the check engine light is blinking, this means that there is a alarming issue and it is recommended to service your Hyundai Tucson quickly. Call the consultants at Courtesy Hyundai of Tampa by dialing 8132855062 so you can describe the issues. Or reduce your speed and bring your 2013 Hyundai to our certified mechanics as soon as attainable.

2013 Hyundai Tucson Check Engine Light

A flashing light indicates that the problem is critical and if not taken care of suddenly may result in leading damage to the vehicle. If the check engine light in your 2013 Hyundai Tucson starts flashing, that means that the problem needs hasty attention and your Hyundai should be brought in suddenly. This twinkling light usually indicates a harsh engine misfire allowing unburned fuel to be ditched into the exhaust system. There it can hastily expand the temperature of the catalytic converter to a point where damage is achievable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can genuinely be the cause. A bad, erstwhile or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very pricey repair. If your check engine light is blinking, please contact our team of automotive experts at Courtesy Hyundai of Tampa instantly by calling 8132855062.