2013 Hyundai Santa Fe Check Engine Light

Check Engine Light Service 2013 Hyundai Santa Fe

What do you do when you’re driving along in your Hyundai Santa Fe and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a tiny because you have tiny idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the cost of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t advocate you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2013 Hyundai Santa Fe checked as soon as likely. Ignoring that warning could end up causing large wear and tear to fancy engine components.

When your 2013 Hyundai Santa Fe's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t possible, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is learn with an electronic audit tool that is used by our Hyundai auto repair mechanics at Courtesy Hyundai of Tampa. There are also a number of rather economical code readers that are designed for do-it-yourselfers, should you select that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an experienced professional to select the issue and repair it.

2013 Hyundai Santa Fe Check Engine Light

If the check engine light in your 2013 Hyundai Santa Fe starts flashing, that means that the problem needs fast attention and your Hyundai should be brought in suddenly. A flashing light implies that the problem is hazardous and if not taken care of suddenly may result in major damage to the automobile. This blinking light usually indicates a rigorous engine misfire allowing unburned fuel to be jettisoned into the exhaust system. There it can quickly raise the temperature of the catalytic converter to a point where wear and tear is conceivable, requiring an expensive repair. Some owners ask if spark plugs cause the check engine light to flash? This can actually be the cause. A bad, classic or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very pricey repair. If your check engine light is flashing, please contact our team of automotive veterans at Courtesy Hyundai of Tampa promptly by calling 8132855062.

Will the check engine light reset itself?

The check engine light on your 2013 Hyundai Santa Fe will usually shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going practical, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2013 Hyundai Santa Fe light will go off after about 20-40 miles. If you drive over that reward and the light is still on, you will need to bring it in to Courtesy Hyundai of Tampa so the light and code can be double-checked and reset.

How much does it cost to get the engine light checked?

The check engine light warns of issues ranging from a gas cap that's not properly tightened to a more perilous failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it convincing to get the correct code reading and diagnosis. The average price for a check engine light diagnosis & testing is generally between $88 and $111. The convincing news, Courtesy Hyundai of Tampa offers complimentary multi-point inspections and free diagnostics, in most cases, to help mean the cause of your check engine light.

2013 Hyundai Santa Fe Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard swiftly lights up, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also noted as the OBD (on-board computer diagnostic system) in your Santa Fe. There are hundreds of back-up codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling main diagnostics will give you possible knowledge about your vehicle and will also allow that Check Engine Light to do what it is certainly supposed to do: be your guide. Unfortunately, noticeable and satisfied vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of possible OBD codes, there are also hundreds of possible reasons for the light, including:

• Ignition system faults
• Fuel and air metering systems problems
• Old Battery
• Computer output circuit issues
• O2 Sensor
• Transmission issues
• Loose Gas Cap or Missing Gas Cap
• Bad Spark Plugs
• Emissions controls issues

This is why it is fantastic for someone who does not have a lot of automotive knowledge to not assume what a code means. When your check engine light comes on, you should get it checked out swiftly by a certified Hyundai mechanic. Call Courtesy Hyundai of Tampa at 8132855062 today or schedule your check engine light service online today! If the engine light comes on due to a relentless concern, you risk bad your car extra by not repairing the issue right away.

What Does the Check Engine Light Mean?

One of the most commonly misunderstood lights or indicators in your 2013 Hyundai Santa Fe is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in various contrasting ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light flashes in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a variety of things for your 2013 Hyundai Santa Fe. Some of these include ignition timing, shifting automatic transmissions controlling engine speed, and implementing stability control, just to name a few. With that being said, the check engine light can mean a range of discrete things. It can be as straightforward as your gas cap being loose or as important as engine knocking. If your check engine light is on in your 2013 Hyundai Santa Fe, contact Courtesy Hyundai of Tampa. Contact Courtesy Hyundai of Tampa today! Our Hyundai service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is flashing.

What could cause the check engine light to come on in a 2013 Hyundai Santa Fe?

When your check engine light comes on, this could be as sane as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a hazardous problem that could cause hazardous damage to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A logical glow constantly means something less hazardous but a blinking check engine light indicates that your vehicle’s engine is in hazardous trouble and service is fundamental hastily. If your check engine light is blinking in your 2013 Hyundai Santa Fe, we extraordinarily recommend not to drive the vehicle and schedule Hyundai service now. Below is a list of the most commonplace reasons your check engine light can come on:

• One of the most authentic and plentiful cause is that your 2013 Hyundai Santa Fe gas cap is loose, damaged or missing. The gas cap for your 2013 Hyundai Santa Fe serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a destructive fuel cap? If your gas cap is old or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't expensive. If your check engine light turns on rapidly after you put gas in your 2013 Hyundai Santa Fe, original thing you should check is to make courageous the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
• Your 2013 Hyundai Santa Fe has a vacuum leak. Every Hyundai Santa Fe has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can dry out and crack, chiefly if they’re exposed to intense heat or extreme bleak.
• Your mass airflow sensor (known as MAF) needs to be replenished. The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is mandatory to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to essential changes, like altitude. If your Hyundai Santa Fe is having trouble starting, idling rough or has a nimble change in the position of the throttle pedal, this could be a sign of a destructive mass airflow sensor.
• Your catalytic converter is destructive or going destructive. The catalytic converter is a part of your 2013 Hyundai Santa Fe’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is normally caused by neglected maintenance, which is why Courtesy Hyundai of Tampa offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2013 Hyundai Santa Fe will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause distinct problems from overheating.
• Issues with any aftermarket items. An aftermarket alarm, exhaust or distinct item can wreak havoc on your 2013 Hyundai Santa Fe if it’s not installed properly. These aftermarket parts and accessories can eject the battery, trigger the check engine light, or even hinder the vehicle from starting. If these issues sound aware, bring your Santa Fe to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed well and aren't causing any issue. Getting accessories, chiefly aftermarket parts and accessories, or using OEM parts original place might price a little bit more but could save you money from having to get poor work and damage caused by poor installation work corrected.
• Your O2 Sensor (Oxygen Sensor) needs to be replenished. The Oxygen sensor, common as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your vehicle will be less productive when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2013 Hyundai Santa Fe's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to elect for the right mixture of air and fuel that enters the cylinders in your engine. A destructive O2 sensor can also cause a car to fail an emissions test.
• The battery is low or dead. The battery in your 2013 Hyundai Santa Fe is every atrocious. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did assorted decades ago, and they don't exactly require maintenance. The price of a new one depends on the type of Hyundai you drive, but check our contemporary service coupons and specials.
• New Spark Plugs or Plug Wires are mandatory for your 2013 Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel mixture in the combustion chamber of your vehicle. This explosion is what moves the pistons and makes the engine run. The spark plug wires deliver the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are destructive or old, you will experience poor performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, extensive to more expensive repairs.

2013 Hyundai Santa Fe Check Engine Light Flashing

Although there are countless potential causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are countless dependable causes including something as classic as a loose gas cap. Extra dependable reasons for a Check Engine Light are dirty mass airflow sensor, a malfunction with the fuel injection system, faulty head gasket, faulty emissions control part, damaged oxygen sensor, or defective spark plugs to name a few. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as decisive to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was fixed.

Every 2013 Hyundai Santa Fe was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its critical systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is guilty nor what to do about it. That’s where we come in; Courtesy Hyundai of Tampa provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Greatly Qualified Service trained.

How many miles can you drive with the check engine light?

If you check engine light is flashing, we recommend that you pull over and contact Courtesy Hyundai of Tampa to help determine if your vehicle is safe to commute in or if we recommend a tow truck. Since each check engine code has its own level of severity, it is difficult to predict how several miles you can commute with the warning light on. The safest bet is to decipher the code and then plan your strategy accordingly. It could be anything from a bad sensor to plug wires needing to be replaced.

Is it safe to drive your 2013 Hyundai Santa Fe with the check engine light on?

If the check engine light is flashing, this means that there is a strict issue and it is recommended to service your Hyundai Santa Fe rapidly. This question is not excessively straightforward because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is often indicated by a steady glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more rigorous problem. Call the specialists at Courtesy Hyundai of Tampa by dialing 8132855062 so you can describe the issues. Or reduce your speed and bring your 2013 Hyundai to our certified mechanics as soon as conscious.