Please wait while the page loads...

How many miles can you drive with the check engine light?

Since each check engine code has its own level of severity, it is difficult to predict how many miles you can drive with the warning light on. It could be anything from a destructive sensor to plug wires needing to be replaced. If you check engine light is flashing, we advise that you pull over and contact Courtesy Hyundai of Tampa to help favor if your vehicle is safe to drive in or if we advise a tow truck. The safest bet is to decipher the code and then plan your strategy accordingly.

2012 Hyundai Santa Fe Check Engine Light Codes

The check engine light turning on can be quite intimidating to see that little light on your vehicle’s dashboard rapidly illuminates, but in reality, it is not something that should cause you to shut down in fear right away. If you hear the term, diagnostic trouble codes (DTC), these are just another name for check engine light codes. These are automotive computer codes stored by the ECM, also known as the OBD (on-board computer diagnostic system) in your Santa Fe. There are hundreds of contrasting codes that your check engine light can represent. While that sounds daunting, with a little patience, tackling central diagnostics will give you fitting knowledge about your vehicle and will also allow that Check Engine Light to do what it is really supposed to do: be your guide. Regrettably, intriguing and apt vehicle symptoms do not always accompany an illuminated Check Engine Light. Since there are hundreds of ready for use OBD codes, there are also hundreds of ready for use reasons for the light, including:

  • Fuel and air metering systems problems
  • Ignition system faults
  • Loose Gas Cap or Missing Gas Cap
  • Emissions controls issues
  • Transmission issues
  • Old Battery
  • Computer output circuit issues
  • Bad Spark Plugs
  • O2 Sensor

This is why it is thought-provoking for someone who does not have a lot of automotive knowledge to not assume what a code means. If the engine light comes on due to a unhealthy concern, you risk bad your car further by not repairing the issue right away. Call Courtesy Hyundai of Tampa at 8132855062 today or schedule your check engine light service online today! When your check engine light comes on, you should get it checked out swiftly by a certified Hyundai mechanic.

Is it safe to drive your 2012 Hyundai Santa Fe with the check engine light on?

If the check engine light is flashing, this means that there is a unhealthy issue and it is recommended to service your Hyundai Santa Fe instantly. This question is not especially prevalent because it all depends on the severity of the issue. If the cause is a minor issue, such as a loose gas cap, it should be safe to drive. This is typically indicated by a logical glow of the check engine light. If you notice a difference in the performance of the vehicle, it could be an indication of a more unhealthy problem. Call the veterans at Courtesy Hyundai of Tampa by dialing 8132855062 so you can describe the issues. Or reduce your speed and transport your 2012 Hyundai to our certified mechanics as soon as conceivable.

What Does the Check Engine Light Mean?

One of the most consistently misunderstood lights or indicators in your 2012 Hyundai Santa Fe is the check engine light. The check engine light is part of the onboard diagnostics system, and displays in a few various ways. It can say "Check Engine", it can be a symbol of an engine, it can even be a combination of both. This light illuminates in either an amber or red color and is part of the diagnostics system found on your vehicle. Onboard computers increasingly have controlled and monitored vehicle performance since the 80s and do a fluctuate of things for your 2012 Hyundai Santa Fe. Some of these include controlling engine speed, shifting automatic transmissions ignition timing, and implementing stability control, just to name a few. With that being said, the check engine light can mean a variety of added things. It can be as easy as your gas cap being loose or as direct as engine knocking. If your check engine light is on in your 2012 Hyundai Santa Fe, contact Courtesy Hyundai of Tampa. Our Hyundai service department can help you find out what code is turning your check engine light on or diagnose why your check engine light is glaring. Contact Courtesy Hyundai of Tampa today!

2012 Hyundai Santa Fe Check Engine Light

If the check engine light in your 2012 Hyundai Santa Fe starts flashing, that means that the problem needs immediate attention and your Hyundai should be brought in expeditiously. A flashing light indicates that the problem is perilous and if not taken care of expeditiously may result in essential damage to the vehicle. This blinking light usually suggests a draconian engine misfire allowing unburned fuel to be dumped into the exhaust system. There it can quickly raise the temperature of the catalytic converter to a point where damage is viable, requiring an lavish repair. Some owners ask if spark plugs cause the check engine light to flash? This can altogether be the cause. A bad, old or dirty spark plug can cause the engine to misfire. If the problem is ignored or you continue to drive, this can spread to the spark plug wires, catalytic converter, or ignition coils which can lead to a very expensive repair. If your check engine light is flashing, please contact our team of automotive experts at Courtesy Hyundai of Tampa immediately by calling 8132855062.

2012 Hyundai Santa Fe Check Engine Light Flashing

Although there are countless likely causes of an illuminated Check Engine Light, we know from years of providing Check Engine Light Diagnosis Service that there are several prevalent causes comprising something as prevalent as a loose gas cap. Substitute prevalent reasons for a Check Engine Light are faulty emissions control part, faulty head gasket, dirty mass airflow sensor, damaged oxygen sensor, a malfunction with the fuel injection system, or defective spark plugs to name copious. No matter what is the root cause of the Check Engine Light, we have the Hyundai Certified Technicians and the certified service protocol to isolate the root problem and repair it as basic to restore factory specifications. When this happens, the Check Engine Light turns off, and you can leave the service center knowing that your Hyundai issue was repaired.

Every 2012 Hyundai Santa Fe was designed with a high-technology performance monitoring system with a computer, and a series of sensors positioned strategically throughout the vehicle on its basic systems. The sensors are continually detecting conditions while sending data to the electronic control unit. If the electronic control unit detects that the data is out of factory specifications, the Check Engine Light illuminates telling you that there is a problem. However, that is the limitation of the Check Engine Light – it won’t tell you what exactly is unsound nor what to do about it. That’s where we come in; Courtesy Hyundai of Tampa provides a Check Engine Light Diagnosis Service that isolates the core problem and gives you a recommendation on what to do next from a Extremely Qualified Service trained.

How much does it cost to get the engine light checked?

The average estimate for a check engine light diagnosis & testing is generally between $88 and $111. The appropriate news, Courtesy Hyundai of Tampa offers complimentary multi-point inspections and free diagnostics, in most cases, to help designate the cause of your check engine light. The check engine light warns of issues ranging from a gas cap that's not well tightened to a more unhealthy failure like a bad catalytic converter or a problem with one of the car's oxygen sensors, so it appropriate to get the suitable code reading and diagnosis.

Check Engine Light Service 2012 Hyundai Santa Fe

What do you do when you’re driving along in your Hyundai Santa Fe and suddenly, a yellow light illuminates on your dash and says "Check Engine". If you’re like most Hyundai owners, your heart sinks a microscopic because you have microscopic idea about what that light is trying to tell you or how you should react. The fear of the unknown (or the price of the unknown) can be just as stressful. But take a deep breath and realize the light coming on doesn’t mean you have to pull the car over to the side of the road and call a tow truck, but it is recommended that you get your 2012 Hyundai Santa Fe checked as soon as handy. Ignoring that warning could end up causing major damage to pricey engine components.

When your 2012 Hyundai Santa Fe's ECM (electronic control module), which is the vehicle's onboard computer, finds a problem in the electronic control system that it can’t convenient, a computer turns on your check engine light. This amber or yellow light is commonly labeled “check engine” or “service engine soon”, or the light may be nothing more than a picture of an engine, or a picture of the engine with the word “check.”

When the light turns on, the ECM stores an engine code or “trouble code” in its memory that identifies as the issue, whether it's a sensor or a failing engine part. This code is read with an electronic diagnose tool that is used by our Hyundai auto repair mechanics at Courtesy Hyundai of Tampa. There are also a number of rather meager code readers that are designed for do-it-yourselfers, should you learn that route too. While this code will tell you the issue that is detected, a true diagnosis still requires an effective professional to learn the issue and repair it.

Will the check engine light reset itself?

The check engine light on your 2012 Hyundai Santa Fe will ordinarily shut itself off if the issue or code that caused it to turn on is fixed. For example, if the cause of your check engine light coming on was a loose gas cap, if it's tightened, the light will turn itself off. Likewise, if your catalytic converter is going functional, and you did a lot of stop-and-go driving, that may have turned on the check engine light due to the high usage of the converter. In most cases, your 2012 Hyundai Santa Fe light will go off after about 20-40 miles. If you drive over that amount and the light is still on, you will need to bring it in to Courtesy Hyundai of Tampa so the light and code can be double-checked and reset.

What could cause the check engine light to come on in a 2012 Hyundai Santa Fe?

When your check engine light comes on, this could be as simple as tightening or replacing your gas cap. Likewise, the check engine light could also be a warning of a strict problem that could cause strict wear and tear to your engine and come with a big repair bill. Depending on your make and model, the check engine light will illuminate or blink. A steady glow often means something less strict but a flashing check engine light illustrates that your vehicle’s engine is in strict trouble and service is crucial at this moment. If your check engine light is flashing in your 2012 Hyundai Santa Fe, we incredibly recommend not to drive the vehicle and schedule Hyundai service today. Below is a list of the most essential reasons your check engine light can come on:

  • Your O2 Sensor (Oxygen Sensor) needs to be replaced. The Oxygen sensor, contemporary as the O2 sensor, measures the amount of oxygen in your exhaust system. If there is excess oxygen in your exhaust system, fuel burns faster and your car will be less accessible when it comes to fuel economy. So what happens if I don’t replace your O2 sensor? A faulty sensor can not only affect your miles per gallon, but it can cause damage to your catalytic converter and your 2012 Hyundai Santa Fe's spark plugs. The O2 sensor sends data to the vehicle’s onboard computer to indicate the right fluctuate of air and fuel that enters the cylinders in your engine. A bad O2 sensor can also cause a car to fail an emissions test.
  • New Spark Plugs or Plug Wires are imperative for your 2012 Hyundai Santa Fe. The spark plugs are the part of your engine that ignites the air/fuel fluctuate in the combustion chamber of your car. This explosion is what moves the pistons and makes the engine run. The spark plug wires bring the spark from the ignition coil to the spark plugs. If your spark plugs or spark plug wires are bad or classic, you will experience low performance and reduced power. In some extreme cases, your engine will have trouble starting or continuing to run. Worn spark plugs and plug wires can cause clogged catalytic converter or damage to ignition coils and O2 sensors, best to more fancy repairs.
  • Your mass airflow sensor (known as MAF) needs to be replaced. The mass airflow sensor in your Hyundai Santa Fe is what determines how much fuel is imperative to run your engine efficiently by measuring the amount of air entering the engine. As a part of the engine management system, the mass airflow sensor helps adjust to clear changes, like altitude. If your Hyundai Santa Fe is having trouble starting, idling rough or has a sudden change in the position of the throttle pedal, this could be a sign of a bad mass airflow sensor.
  • Your 2012 Hyundai Santa Fe has a vacuum leak. Every Hyundai Santa Fe has a vacuum system that performs a wide variety of functions. The vacuum system also helps lower harmful emissions by routing the fumes as gasoline evaporates through the engine. If you notice that your RPM is high in idle or randomly surges, a vacuum leak could be the cause. Over time, vacuum hoses can bare out and crack, especially if they’re exposed to profound heat or extreme brisk.
  • Your catalytic converter is bad or going bad. The catalytic converter is a part of your 2012 Hyundai Santa Fe’s exhaust system. The catalytic converter's function is to turn the carbon monoxide created by the combustion process into carbon dioxide. A damaged catalytic converter is ordinarily caused by neglected maintenance, which is why Courtesy Hyundai of Tampa offers a complimentary multi-point inspection with every Hyundai service. If you have an issue with your catalytic converter and don't get it repaired, your 2012 Hyundai Santa Fe will not pass an emissions test, show a lack of engine performance and will negatively affect your fuel economy. Your car may run at a higher temperature, too, which can cause supplemental problems from overheating.
  • Issues with all aftermarket items. An aftermarket alarm, exhaust or supplemental item can wreak havoc on your 2012 Hyundai Santa Fe if it’s not installed properly. These aftermarket aspects and accessories can drain the battery, trigger the check engine light, or even hinder the car from starting. If these issues sound contemporary, bring your Santa Fe to Hyundai and have our team of certified mechanics ensure that your aftermarket items were installed correctly and aren't causing all issue. Getting accessories, especially aftermarket parts and accessories, or using OEM aspects earliest place might cost a miniature bit more but could save you money from having to get low work and damage caused by low installation work corrected.
  • One of the most contemporary and several cause is that your 2012 Hyundai Santa Fe gas cap is loose, damaged or missing. The gas cap for your 2012 Hyundai Santa Fe serves multiple purposes. It prevents gas fumes from being released when you aren't driving, it seals the fuel system and helps maintain pressure within the fuel tank. What happens if you have a bad fuel cap? If your gas cap is classic or has a ruptured seal, you can lose fuel through evaporation which will result in more trips to the pump. Luckily, to replace a gas cap isn't fancy. If your check engine light turns on hastily after you put gas in your 2012 Hyundai Santa Fe, earliest thing you should check is to make sure the cap isn’t loose — or that it's still on your car’s roof or at the fuel pump.
  • The battery is scanty or dead. The battery in your 2012 Hyundai Santa Fe is every leading. Without a car battery, your car won’t start, light up the road ahead, play the radio or charge your phone. Today’s car batteries last much longer than they did a few decades ago, and they don't really require maintenance. The cost of a new one depends on the type of Hyundai you travel to work, but check our current service coupons and specials.